McCulloch Carpet Cleaner 8823 User Manual

Heavy-Duty Steam Cleaner  
Distributed Exclusively By  
Harbor Freight Tools  
3491 Mission Oaks Blvd.  
Camarillo, CA 93011  
Tel: (800) 444-3353  
Printed in China  
Harbor Freight Tools  
ITEM # 8823  
V080716  
Please read all instructions before use.  
 
NOTES  
IMPORTANT SAFEGUARDS  
WARNING: To reduce the risk of fire, electrical shock, or injury, the  
following basic safety precautions should always be followed when  
using an electrical appliance.  
____________________________________________________  
____________________________________________________  
____________________________________________________  
____________________________________________________  
____________________________________________________  
____________________________________________________  
____________________________________________________  
____________________________________________________  
____________________________________________________  
____________________________________________________  
____________________________________________________  
____________________________________________________  
____________________________________________________  
____________________________________________________  
____________________________________________________  
____________________________________________________  
____________________________________________________  
____________________________________________________  
____________________________________________________  
____________________________________________________  
____________________________________________________  
____________________________________________________  
____________________________________________________  
____________________________________________________  
____________________________________________________  
____________________________________________________  
READ ALL INSTRUCTIONS BEFORE USING YOUR  
HEAVY-DUTY STEAM CLEANER  
1. DO NOT overfill unit with water. DO NOT fill Water Reservoir with more than 48 oz.  
(1,420 ml.) of water. Overfilling may result in burns from spilling water, or possible  
electrical shock.  
2. DO NOT leave your Heavy-Duty Steam Cleaner unattended when plugged in or not in  
use. Use only for its intended purpose as indicated in this manual.  
3.  
This unit is not a toy. Close supervision is required when using unit near  
children, pets, and plants. Steam produced by unit is hot and pressurized. Care  
must be taken to avoid burns or other injuries. Never point nozzle at people or  
pets.  
4. To reduce the risk of contact with hot water emitting from steam vents, hold appliance  
away from body and check for signs of condensation or leakage.  
5. DO NOT use this unit if electrical cord or outlet is damaged. DO NOT use unit if it is  
not working properly or has been dropped, damaged or left outdoors. If such damage  
occurs, DO NOT disassemble or attempt repairs, take unit to a qualified service person  
for examination and repair. Incorrect reassembly or repair could cause a risk of fire,  
electrical shock, or injury to persons when steamer is used.  
6. To reduce risk of electrical shock, DO NOT immerse in water or other liquids. DO  
NOT use electrical cord as a handle. DO NOT allow cord to be crimped by closing it  
in doors. DO NOT pull or stretch cord around sharp corners or edges.  
7. Do not allow cord to touch hot surfaces. Let appliance cool completely before putting  
away. Loop cord loosely around appliance when storing.  
8. DO NOT use this unit with extension cords or electrical outlets that have inadequate  
current capacity.  
SAVE THESE INSTRUCTIONS!  
FOR HOUSEHOLD USE ONLY  
14  
3
 
TROUBLESHOOTING & CUSTOMER SUPPORT  
IMPORTANT SAFEGUARDS  
PROBLEM  
POSSIBLE CAUSE  
SOLUTION  
WARNING: To reduce the risk of electrical shock, this appliance has a  
three-pronged plug. This plug will fit in a polarized wall outlet only one  
way. If the plug does not fit fully in the outlet, contact a licensed  
electrician to install a proper outlet. DO NOT attempt to modify the plug  
or defeat this safety feature.  
Water spills out from Water  
Reservoir fill hole when adding  
water.  
Water Reservoir is already full.  
Do not try to add any more water.  
Water Reservoir is too hot to be  
refilled.  
Allow more cooling time before  
refilling.  
Fill Water Reservoir more slowly.  
Be sure to utilize the provided  
Measuring Cup and Water Funnel  
to refill the unit.  
9. In order to unplug Heavy-Duty Steam Cleaner, grasp plug and pull smoothly and firmly  
from outlet. DO NOT attempt to unplug unit by pulling or tugging on cord.  
10. Burns could occur from touching hot metal parts, hot water or steam. Use care when  
you turn a steam appliance upside down - there may be hot water in Water Reservoir.  
Accessories do not stay firmly  
attached to main steam nozzle.  
Accessories are not being properly Review steps for proper  
installed.  
installation of accessories on  
pages 7 & 8 of this manual.  
Check to ensure that accessories  
are installed correctly.  
11. Unit is only meant to be used with recommended accessories. Other types of  
attachments are not to be used with Heavy-Duty Steam Cleaner. Doing so may result  
in injuries or damage to unit.  
Accessories or main steam nozzle  
is damaged or otherwise incorrect.  
Contact 1-800-444-3353.  
12. Nozzle and attachments become hot during use. To avoid injuries, DO NOT touch  
nozzle while using this appliance. DO NOT attempt to change attachments while unit  
is emitting steam.  
13. When filling your Heavy-Duty Steam Cleaner, only water should be used in unit.  
Other cleaning agents will damage unit and can cause injuries.  
14. Always disconnect appliance from electrical outlet when filling with water or  
emptying, and when not in use.  
15. DO NOT operate unit if steam opening is blocked. Should this occur, immediately  
cease usage and unplug from electrical outlet.  
16. Store your Heavy-Duty Steam Cleaner in a cool, dry place.  
SAVE THESE INSTRUCTIONS!  
FOR HOUSEHOLD USE ONLY  
4
13  
 
HEAVY-DUTY STEAM CLEANER  
PRODUCT INFORMATION  
TROUBLESHOOTING  
The following features and accessories are included with your Heavy-Duty Steam Cleaner.  
Carefully inspect packaging material as some parts are shipped inside Styrofoam packaging.  
PROBLEM  
POSSIBLE CAUSE  
SOLUTION  
Unit fails to steam. Lighted  
On/Off Switch does not  
illuminate.  
Unit is not plugged in.  
Plug into electrical outlet.  
Household Circuit Breaker /  
Ground Fault Interrupter has  
tripped or blown a fuse.  
Reset Circuit Breaker / Ground  
Fault Interrupter, or replace fuse.  
If you need assistance, contact a  
licensed electrician.  
Unit fails to steam. Lighted  
On/Off Switch does illuminate.  
Water Reservoir is empty.  
Mineral build-up in unit.  
Mineral build-up in unit.  
Refill Water Reservoir using  
procedures on page 9 of this  
manual.  
Follow Removing Mineral  
Build-Up procedure on page 11  
of this manual.  
Steam output is intermittent.  
It is normal for unit to  
periodically stop steaming for a  
few seconds. If steam stays off  
for longer periods, follow  
Removing Mineral Build-Up  
procedure on page 11 of this  
manual.  
Unit is emitting excess water.  
Water condensation in Steam  
Hose.  
Point main steam nozzle towards  
sink, tub or ground and shake  
while depressing Steam Button.  
Continue until excess water is  
released.  
UNIT FEATURES & ACCESSORIES  
1. LIGHTED ON/OFF SWITCH  
2. STEAM READY LIGHT  
3. STORAGE COMPARTMENT  
4. WATER RESERVOIR  
5. HANDLE  
6. STEAM LOCK SWITCH  
7. STEAM BUTTON  
8. CARRY HANDLE  
9. STEAM JET NOZZLE  
10. STEAM HOSE  
11. FLOOR BRUSH  
12. SQUEEGEE  
Water Reservoir has been  
over-filled.  
Point main steam nozzle towards  
sink, tub or ground and shake  
while depressing Steam Button to  
remove water that may have  
condensed in Steam Hose.  
Empty some water out of Water  
Reservoir.  
Unit has not reached operating  
temperature.  
Wait until Steam Ready Light  
deactivates to steam.  
13. EXTENSION WANDS  
14. WATER FUNNEL  
15. MEASURING CUP  
16. CLOTH TOWEL  
17. TRIANGLE BRUSH  
18. ASSORTED UTILITY BRUSHES  
19. BRASS UTILITY BRUSH  
20. SCRUB PAD  
12  
5
 
HEAVY-DUTY STEAM CLEANER  
PRODUCT INFORMATION  
CARE & STORAGE GUIDELINES  
PROPER STORAGE  
Preparing your Heavy-Duty Steam Cleaner for storage is quick and simple. When you  
have finished your steaming tasks, follow the steps listed below.  
The Lighted On/Off Switch (1) provides a clear visual indication of whether the unit is  
powered on.  
The Steam Ready Light (2) indicates when the unit is ready to begin steaming.  
The Storage Compartment (3) is used for storing small accessories, and houses the Water  
Reservoir cap.  
The Water Reservoir (4) is the tank in which water is stored for use by the unit. It is  
accessed by removing the Water Reservoir cap found inside the Storage Compartment.  
There must be a sufficient amount of water (16-48 oz. / 473-1,420 ml.) in the Water  
Reservoir in order for the unit to properly function.  
The Handle (5) is designed to stay relatively cool while providing the optimum amount  
of safety and user comfort.  
1. Switch Lighted On/Off Switch to “Off” position and unplug grounded power cord from  
electrical outlet.  
2. Allow unit to cool completely (at least 30 minutes).  
3. Remove all accessories from unit.  
4. Drain any remaining water in Water Reservoir into a sink or tub to prevent over-filling  
The Steam Lock Switch (6) is pushed forward to lock the Steam Button down and provide  
continuous steam.  
The Steam Button (7) is depressed in order to release a spray of hot, penetrating steam  
from the unit.  
during your next use.  
5. Store accessories safely away, near Heavy-Duty Steam Cleaner. Utility Brushes can be  
conveniently stored in the Storage Compartment.  
The Carry Handle (8) provides a convenient place to set the main steam nozzle, and is  
useful for carrying the unit up stairs and over obstacles.  
6. Store Heavy-Duty Steam Cleaner in a cool, dry location.  
The Steam Jet Nozzle (9) focuses the spray of steam from the unit, and serves as the base  
to which all other accessories connect.  
The Steam Hose (10) safely channels the flow of steam from the units boiler to the main  
steam nozzle.  
The Floor Brush (11) is useful for cleaning floors and other large surfaces. The Cloth  
Towel (16) attaches to the Floor Brush for cleaning tile and other hard surface floors.  
The Squeegee (12) can be used to clean mirrors, windows and other smooth glass  
surfaces.  
REMOVING MINERAL BUILD-UP  
A common problem with steam appliances is mineral build-up caused by high mineral  
content in many municipal water supplies. The best way to avoid this is to use de-  
mineralized or distilled water in unit. If you are unable to use de-mineralized or  
distilled water, we recommend you use this procedure monthly to help avoid mineral  
build-up:  
The Extension Wands (13) connect to the main steam nozzle, allowing easy cleaning in  
hard-to-reach places.  
The Water Funnel (14) and the Measuring Cup (15) are provided to assist you in  
easily and consistently filling the Water Reservoir with the optimum amount of water  
(16-48 oz. / 473-1,420 ml.).  
The Triangle Brush (17) is designed for cleaning corners and other difficult angles.  
The Assorted Utility Brushes (18) attach to the Steam Jet Nozzle, providing extra power  
for removing exceptionally tough dirt and stains.  
The Brass Utility Brush (19) attaches to the Steam Jet Nozzle and is designed for  
removing tough stuck-on grease and grime from ovens and grills.  
The Scrub Pad (20) attaches to the Steam Jet Nozzle and is used to clean porcelain and  
countertops.  
1. Switch Lighted On/Off Switch to “Off” position and unplug grounded power cord from  
electrical outlet. Allow unit to completely cool.  
2. Remove all accessories from unit.  
3. Flip up Storage Compartment lid and remove Water Reservoir cap.  
4. Drain water from Water Reservoir into sink or tub.  
5. Using Measuring Cup, make a mixture of 8 oz. (237 ml.) vinegar and 8 oz. (237 ml.)  
water.  
6. Slowly pour water-vinegar solution into Water Reservoir.  
7. Allow to stand for 40 minutes.  
8. Drain water-vinegar solution from Water Reservoir.  
9. Rinse Water Reservoir with fresh water, drain and repeat until vinegar odor dissipates.  
10. Replace Water Reservoir cap and lower Storage Compartment lid back down.  
6
11  
 
USING THE  
HEAVY-DUTY STEAM CLEANER  
ASSEMBLING THE  
HEAVY-DUTY STEAM CLEANER  
OPERATING HEAVY-DUTY STEAM CLEANER  
ATTACHING CARRY HANDLE  
NOTE: Be sure that Water Reservoir has already been filled and that all desired  
accessories are connected before following these steps.  
1. Insert Carry Handle into Carry Handle hole  
on top of unit. Please refer to illustration  
for assistance with proper alignment  
(FIGURE 1).  
1. Plug grounded power cord into a convenient electrical outlet.  
CAUTION: This unit uses a grounded (3-prong) electrical plug. Use only in  
properly installed 3-prong electrical outlets. Do not attempt to alter plug or  
circumvent this safety feature in any way.  
2. Use enclosed magnetic screw driver and  
screw to securely fasten Carry Handle to  
unit.  
2. Switch Lighted On/Off Switch to “On” position. Steam Ready Light will immediately  
illuminate.  
NOTE: Steam Ready Light is illuminated while boiler is heating.  
3. Steam Ready Light will deactivate in 2-8 minutes (depending on how much water is in  
Water Reservoir), indicating that boiler is heated and unit is ready to begin steaming.  
FIGURE 1  
4. Direct Steam Jet Nozzle (or other accessories) towards surface you desire to steam, and  
press Steam Button. To sanitize surfaces, point Steam Jet Nozzle, press Steam Button  
and hold approximately 1/2 inch from surface for at least 5 seconds. This will insure  
that you have killed germs and bacteria.  
ATTACHING MAIN ACCESSORIES  
WARNING: Do not try to connect accessories while unit is emitting steam.  
This section applies to the Steam Jet Nozzle, Squeegee, Floor Brush, Extension  
Wands and Triangle Brush.  
CAUTION: Always be sure that Steam Jet Nozzle and other accessories are  
pointed in a safe direction (away from yourself, other people, pets, and plants)  
before pressing Steam Button.  
1. Depress red lock/release button on main steam nozzle (FIGURE 2-A).  
2. While still depressing lock/release button, slide Steam Jet Nozzle or other accessory  
over this button, so that rectangular hole in attachment aligns with lock/release button  
(FIGURE 2-B).  
3. Once lock/release button and rectangular hole are properly aligned, button should click  
through hole and into place.  
5. Keep Steam Button depressed for a continuous flow of steam. You may also slide the  
Steam Lock Switch forward while depressing the Steam Button to lock the Steam  
Button down. This will let you have a continuous flow of steam without having to hold  
down the Steam Button.  
4. To remove Steam Jet Nozzle or other accessory, press in red lock/release button and  
pull attachment off of main steam nozzle.  
6. Using a slight back-and-forth motion over the area you are steaming will further  
enhance the cleaning process. Wipe steamed areas with a clean cloth to remove  
loosened dirt and grime. Wiping the area while it is still wet is recommended, but use  
caution when wiping surfaces such as metal that may still be hot.  
NOTE: During use, the Steam Ready Light may illuminate. This is normal. If you  
notice a drop in steam pressure, release Steam Button until Steam Ready Light  
deactivates once again.  
7. Once steaming tasks are complete, immediately set Lighted On/Off Switch to “Off”  
position and unplug grounded power cord from electrical outlet. Follow steps under  
Proper Storage procedure on page 11 of this manual.  
FIGURE 2  
10  
7
 
ASSEMBLING THE  
HEAVY-DUTY STEAM CLEANER  
USING THE  
HEAVY-DUTY STEAM CLEANER  
ATTACHING UTILITY BRUSHES  
FILLING WATER RESERVOIR WITH WATER  
WARNING: Do not try to connect accessories while unit is emitting steam.  
1. Place Steam Cleaner on a flat, level surface.  
This section applies to all Utility Brushes. Note that Utility Brushes attach to Steam  
Jet Nozzle, not to main steam nozzle.  
2. Make sure Lighted On/Off Switch is set to “Off” position and grounded power cord is  
unplugged from electrical outlet.  
1. Align guide tab on inside of Utility Brush (FIGURE 3-A) with groove on bottom  
of Steam Jet Nozzle tip (FIGURE 3-B), and firmly press Utility Brush onto  
Steam Jet Nozzle.  
3. Press and hold Steam Button to ensure that any remaining steam has been emitted from  
unit.  
2. Press Utility Brush as far on to Steam Jet Nozzle as possible to ensure that it is  
properly sealed, to help prevent any steam leakage (FIGURE 4).  
3. To remove Utility Brush, simply grip it firmly and pull it off of Steam Jet  
Nozzle.  
4. Flip up Storage Compartment lid. Cautiously unscrew and remove Water Reservoir  
cap.  
5. Water Reservoir should always be emptied after each use. If it was not emptied after  
the last use, empty it now. This will prevent over-filling.  
6. Fill Measuring Cup to maximum fill line (16 oz. / 473 ml.) with water.  
NOTE: To prolong the life of your Steam Cleaner, we recommend using distilled  
or de-mineralized water.  
7. Carefully pour water from Measuring Cup into Water Reservoir through fill hole.  
WARNING: Extreme caution should be used when pouring water into the Water  
Reservoir. Do not look directly down into fill hole when filling. Keep your free  
hand and any children or pets at a safe distance.  
8. Depending on how long you intend to steam, you may repeat steps 6 & 7 up to two  
more times, to have up to a maximum of 48 oz. (1,420 ml.) of water. See chart for a  
comparison of the amount of water vs. approximate steam time.  
FIGURE 4  
FIGURE 3  
ATTACHING SCRUB PAD  
This section applies to the Scrub Pad. Note that Scrub Pad  
attaches to Steam Jet Nozzle, not to main steam nozzle.  
1. Place Scrub Pad over tip of Steam Jet Nozzle, and firmly  
press it as far on to Steam Jet Nozzle as possible to ensure  
that it is properly sealed (FIGURE 5). This will help  
prevent any steam leakage.  
2. To remove Scrub Pad, simply grip it firmly and pull it off of  
Steam Jet Nozzle.  
9. Replace Water Reservoir cap, ensuring that it is screwed on tightly to prevent hot steam  
from escaping and causing injury.  
FIGURE 5  
10. Lower Storage Compartment lid back down.  
8
9
 

Lance Larkin Coffeemaker Brew Express CoffeeMaker User Manual
Land Pride Tiller rtr12 User Manual
Lifebreath Water Heater AH40BHW User Manual
Magnavox CRT Television PRI907X User Manual
Makita Router RP0900 User Manual
Manitowoc Ice Ice Maker K00375 User Manual
Master Lock Clock LTR4 512 User Manual
Maxim Blender RRFP1A T User Manual
Mercedes Benz Nail Gun R230 User Manual
Metabo Grinder GA 18 LTX G User Manual